Enrich areas with CO2 - grab a Pro-Leaf CO2 Generator. 

It burns Natural Gas to produce CO2 + water vapour. 

They're super flexible - you can modify your CO2 output with ease. To do this, you simply cap off burners (4kW model) or use the handy selector switches (10kW).

Each unit is complete with an electronic solenoid assembly - you can turn off CO2 generation at set times (with no gas leaks!).
 

Runs on Natural Gas

Can modify CO2 output! 
    *Modify CO2 Output Caps Included
No Pilot Flame-The intelligent electronic ignition system removes the need for one.

Suspend It Or Stand It
Suspend it using rope ratchets...Stand it up on the expandable metal leg attachments.

Solenoid Valve Attachment
This allows you to turn the CO2 supply off & on. Never get a controller without a solenoid valve - you won't be able to shut off the gas supply completely.

Tip-Over Safety Switch
There's also a tip-over switch, which cuts power if the unit isn't upright.

Minimal Carbon Deposits
To reduce carbon build ups, the brass burners have chrome lined tips.

Even CO2 Dispersion
CO2 is pushed out of both sides of the unit, thanks to the unique 'V' shaped internal design.

Why Add CO2?
Plants use CO2 for photosynthesis (sugar production). If CO2 is restricted, so is sugar production.
Plants can handle 1000ppm - 1200ppm of CO2. There's only around 400ppm - 450ppm in the air. Bringing that up to the optimum 1200ppm is one of the easiest ways to increases your yield by up to 20%!
 In summer, extra CO2 and also helps plants with heat stress by photosynthesising more!